Forum

Engineering Explained Forum

40 comments:

  1. can any one tell me the appropriate rotor size for 13 inch wheel, it is a formula car with disc brakes

    ReplyDelete
    Replies
    1. Please re-post this question in the FSAE sub forum, thanks!

      Delete
  2. hey i have a 2013 scion frs and was wanting to get a turbo and was thinking about an als system and i was wondering what i can do to reinforce the exhaust manifolds so i dont mess up me car

    ReplyDelete
    Replies
    1. Please re-post this in the tuning/modifying/building a car subforum, thanks!!

      Delete
  3. ATTENTION! THE COMMENTS HERE ARE FOR SUGGESTIONS ON SUB-FORUMS ONLY. PLEASE POST YOUR FORUM TOPICS WITHIN THE APPROPRIATE SUB-FORUM!!

    THANKS!

    ReplyDelete
  4. Hey, probably adding a sub-forum of DIY under Tuning/Modifying/Building a Car is great. There DIY lovers, include me.. :)

    ReplyDelete
  5. Which software is best when it comes to designing a car? Would you recommend a Catia V5R20?

    ReplyDelete
    Replies
    1. it depends on the level of car designing

      Delete
  6. why do some sports cars use alsohol as their fuel?

    ReplyDelete
  7. How do you select a motor to drive an electric car of mass 500kg? what are the considerations and respective calculations? please do help. Thank you.

    ReplyDelete
  8. Great videos man, well done

    ReplyDelete
  9. It’s a good thing that they hold forums like this one. With these forums, they are helping a lot of consumers regarding their car; revealing transparencies to consumers may help them practice their rights as consumers.

    ReplyDelete
  10. can i use four wheel steering in mini baja,as there is space problem?

    ReplyDelete
  11. Yes, I do agree with you, Wells forums like these are very helpful to consumers. They should hold more car forums or what’s best, every car dealer should have these kinds of forum to cater the needs of their consumers.

    ReplyDelete
  12. Why does the usual high performance cars uses the "V" layout engine but not the Boxster type engine?

    ReplyDelete
  13. Please upload some ebook of automobile engg.

    ReplyDelete
  14. please tell us about all parts of car practicatly

    ReplyDelete
  15. Hey Jason.
    I have a query regarding Continuously Variable Transmission tech. It seems to be so much lighter than the conventional gearbox. And the disadvantage that you mentioned in your video, that they aren't strong enough to sustain to loads of powerful engines, its not like the problem can't be addressed. So why isn't Formula One going with it?

    ReplyDelete
  16. Hi Jason,

    I have an acura el 1999 with 125000 miles, the temperature goes up, i go to the garage with and they found anti freeze in the mufler, and they advise me to change the engine.
    What do you think about that? Is it the only one solution?

    ReplyDelete
  17. I just need to clarify one point about the Torsen LSD. Do the pinion gears that drive the worm gears slide along their respective shafts to create the needed friction or are they fixed to the shaft?

    ReplyDelete
  18. Hi Jason, I own a 1953 Ford Crestline Skyliner (bubble-top) and I'd like to know if a limited-slip differential can be fabricated for my car that would fit in my stock ham-housing?

    ReplyDelete
  19. hey please answer , i am a mech. engg student&automobile enthusiast and have been regularly in touch with your videos and learn from them. I have one question :

    the new lamborghini asterion 910-4 has been launched
    i want to know that why despite of more power , this car has
    0-100kph time of 3.0 sec whereas aventador 700-4 does 100kph in 2.7 sec
    Despite having an electic motor which fills the gaps between gear shifts , why is asterion lagging??
    Is it because of extra 280 kg of weight

    ReplyDelete
  20. Another article related to fuel efficiency says truly fuel efficient cars are banned in the United States:

    http://www.mostholyfamilymonastery.com/news/truly-fuel-efficient-cars-currently-available-europe-banned-us-market/#.VJyNNLgaU

    ReplyDelete
  21. Can someone tell me what to do if a crankshaft in a car is bent? And all the bearings has been grinded. It's a 4g64 motor by the way...Thank You in advance

    ReplyDelete
  22. hey im a really big fan of your work and a pretty big car enthusiast completing my 2nd year in mechanical engineering. could you please help me convert and a right hand drive to a left hand drive mainly converting a rhd manual rack and pinion steering system to an rhd one and any other suggestions that you have. it would be really helpfull. thanks a ton

    ReplyDelete
  23. hey guys .....
    i wanted to make my own car and i was confused if i can use a front mounted front wheel drive engine to make a rear mounted rear wheel drive buggy .
    please help me guys.

    ReplyDelete
  24. Respected Sir:

    I leave in Hyderabad, Andhra Pradesh (Telengana), India.


    My dad is a tailor and want to buy a new Honda scooter for his daily use his traveling is minimum 50-55 KM daily.

    Can you please suggest me that which scooter i have to buy for best of mileage.

    I suggest my dad to buy Activa i as it has mileage of 83 km/l form company as well as low price than others.

    But I want to get the suggestion from you so that i can move a head to buy the vehicle.


    Waiting for your reply.

    ReplyDelete
  25. When is project integra happening again, just curious because I also have an integra.

    ReplyDelete
  26. Good day everyone. Can you tell me if CVT fluid work in an atf transmission? I've got a quart of Acura cvt fluid lying around and I was just wondering. Thank you..

    ReplyDelete
  27. Me and my team are building an a.t.v. and so we want good quality steel. Fir the time being we have considered AISI 1026 for the purpose but could you plz suggest us some other good quality material which is also not so much expensive.

    ReplyDelete
  28. Hey,
    I am a current engineering student, I started out great my first four semesters, honors college, 3.5+ G.P.A etc. tuition got expensive so I had to start working 30+ hours a week. My G.P.A has plummeted to the mid 2 range(2.4) over the last three semesters. I am terrified I will not get a job in the MotorSports career I desire. What can I do? Is engineering not for me? Should I still have been able to maintain a 3.0+ G.P.A regardless of occupational status? I do want to add I am the SAE president and member of formula SAE and Eco-car3.

    ReplyDelete
  29. I would like to know how fuel injection timing is changed?

    ReplyDelete
  30. I want to know about plenum. How to design a plenum,material,factors consider while designing?

    ReplyDelete
  31. Additional suspension request. You love roadsters, but the mazda and fiat have multi-link rear suspensions which I have not seen a video on. I would like to see a video on roadster rear suspension common type comparison.

    ReplyDelete
  32. Hello guys. Nice to meet you! I would to know what happened mechanicaly in the motor when you press the accelerator pedal?

    ReplyDelete
  33. This comment has been removed by the author.

    ReplyDelete
  34. Sir , can you make a video on mercedes agility control system
    Here is the link to youtube video of it
    https://youtu.be/fDL9V8562Yk

    ReplyDelete
  35. Parece increíble pero comienza en 65k. Sí, lo leíste bien, no es un error tipográfico, es 65k. Teniendo esto en mente, tratando de pasarlo por un original no parece replicas relojes espana demasiado atractivo, pero mirando lo bien que está puesto juntos y lo bien que cae en la muñeca parecen ser más realistas.

    Me encanta la apariencia y la sensación de replicas rolex esta pieza y cae en mi preferencia casos grandes también. Pulsera de acero inoxidable tiene el mismo patrón que las pulseras Grand Carrera y el logotipo de replicas breitling la etiqueta en el cierre plegable por lo que todo suma bien. See-through trasero caso expone el movimiento de color gris oscuro que parece increíble y tiene algunos buenos toques finales. No voy a darle más información escrita sobre esta pieza en este momento, así que echa un vistazo al replicas omega y déjame saber qué piensas de él.

    ReplyDelete
  36. Can anyone tell me how to calculate the centre of gravity height of a race car ?
    PS: The car is still in the making.

    ReplyDelete